Payment & Shipping Terms:
|Power Supply:||220V+10%/50HZ 110V+10%/60HZ||Motor Power:||140W|
|LED Light:||15A, 200w||BBarrier Height After The Lift:||Depending On The Arm Length|
|Communication Interface:||RS485||Input Interface:||+12V Level Signal Or More Than 100ms Impulse Driving Current Less Than 10mA|
Waterproof Remote Control Parking Lot Boom Advertising Barriers For Outdoor
|Length of boom arm||Customized depend on demands|
|Arm plate number||Depends on the boom length|
|Advertising plate size||82x830mm|
|Screen size boxes||450x880mm|
|LED light power||16.7A,200 W|
|Barrier height after the lift||Depending on the arm length|
|Working speed||Generally for 5 seconds(Special requirements can be customized)|
|The arm center height||1050mm|
|Input interface||+12 Level signal or pulse signal is greater than 100ms,the derive current of less than 10mA|
Advertising Barrier Features
1.1 Advertising barrier’s house is durable and water-proof, so it can be used outdoor.
1. 2 Appearance is simple and generous with advertising lamp house And advertising board. Advertising board can be dismantled, and easy to change advertising photo, All operation is simple.
1.3 Both barrier housing and arm plate are equipped with LED lights, the LED lights can be controller via timer(it can be set like this: close in day time and open at night).
1.4 Combination of lights, electricity and mechanical control. Operation is flexible and convenient. Safe and reliable in use
1.5. Multiplex control way are provided for user: push button, remote controller, long range reader etc.
1.6. Adopt multiple protective measures (like anti-wind, preventing motor overheat, Anti-surge, Thunder-proof and so on),which increase barrier’s safety and reliability.
1.7. Add loop sensor, following functions can be realized: auto close, auto bounce up etc.It can automatic closing gate and perfect preventing smashing car.
1.9. System adopts standard electric interface which can connect with other system easily.
Advertising Barrier Security Features
2.1. Pressure sensor: During closing, arm will auto bounce back if it meets any resistance
to reduce damage(pressure sensor is with function of anti-collision).
2.2．Loop sensor: Arm will open automatically during closing If controller gets signal from
the sensor. Barrier cannot be closed till loop sensor trigger signal off. And loop sensor
will close barrier automatically after signal.
2.3. Open first function: No matter what barrier arm status is, gate will carry out open
order at once when open signal is got.
2.4. Protective rubber: Rubber is fix at the arm bottom. It can minus damages if any
Parameters of Advertising Barrier Controller
3.1. Remote controller handle or wire controller to open, close and stop.
3.2. 5V power rising, closing arm reach connector
3.3. Infrared and pressure sensor interface (anti-crash interface).
3.4. Anti-crash and auto close function (loop detector connector).
3.5. Prevent blocking.
3.6. Traffic lights interfaces.
3.7. After fallen boom arm in place, then connected output connector
3.8. Copy remote controller function.